Cotton, synthetic, blended, and stretch fabrics, impregnated materials, as well as fabrics printed or dyed using sublimation.
Apply the powder to the freshly printed DTF film manually or using an automatic shaker.
Cure the powder in an oven at a temperature starting from 110°C (230°F) for at least 60 seconds, until completely dry.
Once cured, the adhesive should have a glossy, rubber-like appearance with an orange-peel texture.
Shake the film to remove any excess powder.
Wait at least 24 hours before the first wash.
Maximum washing temperature: 60°C (140°F).
Wash garments inside out.
Tumble dry on a delicate cycle.
Do not use bleach or other aggressive chemicals.
Composition: 100% TPU
Particle size: 80–170 μm
Color: White
Melting time: From 60 seconds
Elongation at break: 600%
The hot-melt powder for DTF film is supplied in airtight 1 kg bags to preserve its chemical properties.
We recommend using one package at a time and completely consuming the contents of each opened bag before opening a new one. This helps prevent moisture from negatively affecting the product's performance.
TPU powders are particularly sensitive to moisture; therefore, the product should be stored at a controlled relative humidity of 40–60%.
After use, always reseal the bag carefully.
Keep away from:
Direct moisture
Heat sources
Direct UV exposure
Recommended storage temperature: 15–35°C (59–95°F)
The product complies with REACH Regulation (EC) No. 1907/2006.
Heat press temperature: 120–140°C (248–284°F)
Pressing time: 8–15 seconds
Film removal: Hot peel
Pressure: Medium
To improve adhesion on difficult materials, perform a second press at the same temperature for 5 seconds after removing the film.
en
de
